|
|
American Made!
Our business is Automactic Swimming Pool Cleaners . The first thing you will notice when you look at the PoolCleaner ™ is that it is of highest quality. The PoolCleaner ™ is robust and if maintained properly will result in many years of pool cleaning. We use only the highest quality materials to ensure the best pool cleaning products. The PoolCleaner ™ is proudly made in the USA. This cleaner was designed and built with many years of experience iin the pool industry. Each cleaner is tested to assure the finest quality.
The revolutionary PoolCleaner™ systmes uses your existing pump and filter for power. There is no need for an extra booster pump. This means energy savings..
SELF ADJUSTING TURBINE VANES
All the POOLCLEANER™ cleaners have the patented self-adjusting turbines, which maximizes the power from the water flow. This turbine is similar to a paddle wheel with blades that are adjustable. This feature allows the POOLCLEANER™ to still move at low suction and low pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner.
STEERING SYSTEM
The Pressure POOLCLEANER ™ is the only pressure side cleaner with an internal programmed steering system, that causes the left wheels to periodically turn backwards, allowing the POOLCLEANER ™ to turn and then move into another direction. For the Pressure POOLCLEANER™ there are three different programmed turns ranging from 90 to 450 degrees and this allows the pressure POOLCLEANER™ to travel 12 to 14 ft. before it turns. The POOLCLEANER™ cleans more in the shallow end than any other cleaner. The POOLCLEANER™ has no problem with uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain. There is no need for ineffective backup valves.
ROBUST TIRE TREADS
One look and you will see that the patented tire treads give the POOLCLEANER™ better climbing ability and obstacle maneuverability. The tires come with tread wear markers that show you when to replace your tires. The front tires of the POOLCLEANER™ have humps (raised treads) that allow the POOLCLEANER™ to overcome any reasonable obstacles such as the main drain and uneven surfaces. This makes the POOLCLEANER™ ideal for all pool surfaces and shapes.
ADJUSTABLE SKIRT
The POOLCLEANER™ has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when it encounters obstacles. When the POOLCLEANER™ encounters an obstacle one (or more) of the skirts will lift up (adjust) over the obstacle while maintaining suction under the cleaner.
|
 |
The 2x Suction PoolCleaner™ 2x is ideal for most average sized pools. The 2x Suction POOLCLEANER™ has an internal programmed steering system, that causes the left wheel to periodically reverse, allowing the POOLCLEANER™ to turn and then move into another direction. For the 2x Suction POOLCLEANER™ there are five different programmed turns ranging from 90 to 450 degrees.
$369.00
|
|
 |
The POOLCLEANER™ is a patented 4 wheel drive FOUR WHEEL DRIVE is suited for larger pools. What this means to you is that in combination with the patented tire treads, the cleaner has the power to overcome obstacles that normally stop other cleaners.
$389.00
|
|
 |
ThePressure PoolCleaner is great for pools with lots of large debris. The Pressure POOLCLEANER ™ comes with an important pressure relief valve that regulates the pressure flow to the Pressure POOLCLEANER™. This relief valve regulates the pressure so as to not exceed the optimal pressure (12-15 PSI or 11-13 RPM). This will ensure the best possible performance from your Pressure POOLCLEANER™. It does so by opening to bypass water when necessary. Not using the Pressure Relief Valve may cause excessive wear and damage and hence will void the warranty.
$419.00
|
|
